
Night Transfer
You can transfer the day (or normal) ringing assignments of incoming lines to a
particular station or stations for off-hour or special purpose answering (such
line/station ringing assignments are made through class of service programming).
Additionally, installers can arrange stations to answer any ringing outside line.
This ability to answer a line from any station is activated when you enable the
night transfer of ringing mode.
·
To set the night transfer mode from the attendant’s station,
1. PRESS INTERCOM.
2. DIAL
*#03.
3. PRESS L1 (top, left-hand programmable button) to alternate the
feature between on and off, OR
•
DIAL 1 to enable OR DIAL 2 to disable.
NOTE: Associated light will turn on when night transfer is active and will turn
off when the feature is disabled. When the system is in night transfer mode,
the intercom light at station 10 and station 12 will flutter with repetitive off
periods.
4. PRESS SPEAKER to end.
Because Night Transfer is a commonly used feature, you may wish to program a
button to serve as the Night Transfer button.
·
To program a Night-Transfer button,
1. PRESS INTERCOM.
2. DIAL
**1.
3. PRESS one of the programmable buttons.
4. PRESS INTERCOM.
5. DIAL
*#03.
6. PRESS SPEAKER to end.
90 Attendant Manual - DSU II Digital Expandable System
Attendant Features GCA70-245
Comentarios a estos manuales